Water Features and Spillovers: What They Add to a Fibreglass Pool

Pool water features are the part of a pool people fall for in photos and then forget to plan. A spillover spa, a sheer descent or a few deck jets can change how a backyard looks and sounds. They also change the plumbing, the running costs and the water chemistry.

We build fibreglass pools in Officer and right across South East Melbourne, and our advice is the same everywhere: decide on features before the dig, not after.

In short

  • A spillover spa is the most popular water feature on a fibreglass pool because it adds a warm soak and the sound of falling water in one.
  • Moving water loses heat and evaporates faster, so features can cool a heated pool if they run all the time.
  • Aeration from waterfalls and jets tends to push pH up, which means checking chemistry a little more often.
  • Plumbing for features is far easier to install during the build than to retrofit later.

The main options, and what each one does

  • Spillover spa. A raised spa that spills into the main pool. You get a warm soak and a constant water sound.
  • Built-in spa. A spa zone moulded into the pool shell, sharing the same water. Neat and space-efficient.
  • Sheer descents and wall features. A thin curtain of water from a raised wall. Mostly visual and acoustic.
  • Deck jets. Arcs of water from the surrounding paving into the pool. Kids love them.
  • Lighting. Not water as such, but it’s what makes any feature look good at night.

For the full rundown on spa layouts, including spillover designs, see our guide to fibreglass pool and spa combinations. This piece focuses on the practical side.

What a water feature actually adds

Sound is underrated. On a suburban block, a steady trickle of water softens road noise and the neighbour’s air conditioner more than you’d expect.

A spa adds use. Even when the main pool is too cool, a heated spa gets used through autumn and winter. In the Leisure Pools range, the Capri and Amalfi spas are both available with spillover options.

Our Narre Warren Allure 12 with a built-in spa shows the integrated approach. One shell, one water body, and a dedicated spot to sit and soak.

The sound of water is what people notice first. The heating bill is what they notice second.

The honest trade-offs

Heat loss. Water spilling or spraying through the air cools quickly and evaporates faster. If you heat the pool, run features when you’re using them rather than all day.

Chemistry. Aeration tends to push pH up over time. It’s manageable, but you’ll check and balance a little more often than with a still pool.

Equipment. Some features need their own pump or a valve setup, plus switching. That means more on the equipment pad and more power use when they run.

Noise. The same water sound you love from the deck can carry to a bedroom window or over the fence. Think about where it faces.

Planning features into the build

Plumbing for a spillover, jets or a sheer descent runs under the coping and paving. Putting it in during construction is straightforward. Adding it later can mean lifting paving you’ve just paid for.

Feature costs vary a lot with the type, the pump setup and the controls, so we don’t quote a generic figure. Your quote will itemise each one so you can decide what earns its place.

Making space for a spa on a smaller yard

On a tight block, a built-in spa often makes more sense than a separate raised spa, because it doesn’t need its own footprint. For help working out what fits, our guide to sizing a pool for an estate backyard covers usable space. Families in Officer, Berwick and Narre Warren South often find a compact pool with a spa zone gives more use than a longer pool without one.

Choose features with your eyes open

Water features are worth having when they suit how you’ll use the yard. Tell us what you’re picturing and we’ll be straight about what it adds, what it costs to run and what it needs on the plan. Book a free measure and quote to talk it through on site.

Frequently asked questions

Is a spillover spa worth it on a fibreglass pool?

For many families, yes. It gives you a warm soak in cooler months and the sound of falling water year round. The trade-off is extra plumbing, more heat loss while the spillover runs and some additional running cost. Plan it during the build for the cleanest result.

Do water features make a pool colder?

They can. Water moving through the air loses heat and evaporates faster, so a waterfall or deck jets running all day will cool a heated pool. Using a timer or running features only when you’re in the yard keeps the effect small.

Can I add a water feature to an existing pool?

Sometimes, but it’s usually harder and costlier than planning it in. Plumbing has to run under the coping or paving, which may need lifting, and the equipment may need an extra pump. Ask about features at quote stage even if you add them later.

What pool features suit a small backyard in Officer or Berwick?

A built-in spa, a compact spillover spa or a slim sheer descent on one wall work well in smaller local yards. They add use and sound without a big footprint. Check how features affect your barrier, paving and equipment pad before deciding.

Robbie Pavanello, Owner & Builder

Registered Builder DB-U29680 · SPASA member · building fibreglass pools across South East Melbourne since 2001

Robbie quotes every job himself and is on site for every build, from the dig through to handover. More than 1,500 pools later, he still walks every block before he prices it.

This article is general information only. Approvals, site conditions and costs vary by block and council, so get site-specific advice before making decisions.

The straight answer

Heating won’t beat a Melbourne winter. It’ll take a pool you use for a handful of weeks and turn it into something that’s part of how your family lives for over half the year.

Whether that’s worth it depends on how much you’d actually use it, and we’d rather you answered that honestly before you spend the money than afterwards.

If you’d like a straight answer on what heating would cost for your pool, or you’re ready to get moving on a build, contact us for a free measure and quote.

About the Author: Robbie Pavanello

Robbie PavanelloRobbie Pavanello, Owner & Builder | Registered Builder: DB-U29680 | SPASA Member since 2001

Robbie Pavanello is a licensed pool builder with hands-on experience delivering fibreglass pool installations across the Mornington Peninsula and South East Melbourne. He works directly on site, overseeing excavation, approvals, and installation, with a focus on soil-specific construction, council compliance, and long-term durability.

Disclaimer: This article provides general information only. Pool design, approvals and site requirements vary by block and council. Always obtain site-specific advice before making financial decisions.

Keep reading

More Related Posts